10 kV Oil-Immersed Power Transformer
Brand name: HANI
Packing Details : Wooden box with fumigation or Wooden Fram or Steel Frame
Delivery Details: 30~60days or Based on the quantity
Shipping: Sea freight、Land freight、Air freight
HANI specializes in industrial electrical automation, delivering integrated drive and control solutions to safeguard your production.
Product Details
Product overview
The S13, S20 and S22 series hermetically sealed oil-immersed transformers are suitable for AC 50 Hz power systems with a rated operating voltage of 20 kV and below, where they serve as distribution transformers for petroleum, metallurgy, chemical, textile and light industries and for dusty locations.
At a glance
| Voltage class | MV |
| Product Type | Oil-immersed Power Transformer |
| Rated Capacity | 30~2500kVA |
Design features
- Core
- The core uses high-permeability grain-oriented cold-rolled silicon steel sheet. It is a new type of core: a fully mitred, stacked core whose limbs have a multi-step circular cross-section and whose yokes have the same cross-section as the limbs.
- Winding
- The windings use corrugated oil ducts, a no-dip varnish process and tight-band binding; all windings are concentric coils. The HV winding has taps for the required tapping voltages, led to the tap changer mounted on the tank cover; the supply must be switched off before changing the tapping voltage.
- Safety protection devices
- Transformers of 30~2000 kVA are fitted with a pressure relief valve;
- A gas relay with alarm and trip contacts can be fitted to customer requirements;
- Oil temperature measuring device
- All transformers are fitted with glass-thermometer wells on the tank top, extending 120 ± 10 mm into the oil;
- Transformers of 1000~2000 kVA are fitted with an outdoor signal thermometer;
- Transformer tank
- The transformer tank is formed by corrugated walls and has a powder-coated surface with a durable paint film. The corrugated radiators not only provide cooling but also “breathe”: their elasticity compensates for changes in transformer oil volume caused by temperature rise and fall. The hermetically sealed transformer therefore needs no oil conservator, which reduces the overall height of the transformer.
- Before sealing, the transformer is vacuum oil-filled, which completely removes moisture; the transformer oil does not come into contact with air. This effectively prevents oxygen and moisture from entering the transformer and degrading the insulation or ageing the oil, so no periodic oil sampling is required.
- S11 10 kV performance and features: The corrugated tank body and its fins act as the cooling elements of the hermetically sealed power transformer. The fins expand and contract with the volume of the transformer oil, isolating the interior of the transformer from the atmosphere and preventing oil deterioration and insulation dampness and ageing. The core is made of high-quality cold-rolled grain-oriented silicon steel sheet, which effectively improves the flux density distribution inside the core, reducing noise and losses. The windings use high-strength enamelled wire (or paper-covered wire), wound in cylindrical (or disc) construction, with uniform ampere-turn distribution and a rational insulation structure, giving strong short-circuit withstand capability. The tank surface is phosphated and then coated with a three-proof finish (moisture-proof, mould-proof and salt-fog-proof), and the product is widely used in metallurgy, mining, petrochemicals and other harsh environments.
- S13 10 kV performance and features: The S13 oil-immersed transformer is currently the most energy-efficient product among laminated-core transformers. Our S13 series uses high-quality 0.23 mm grain-oriented magnetic silicon steel sheet; both HV and LV windings are made of copper foil and copper conductor; the HV winding uses a multi-layer cylindrical structure so that the ampere-turn distribution is balanced, leakage flux is small, mechanical strength is high and short-circuit withstand is strong. Coils and core are vacuum dried, and the transformer oil is vacuum filtered and vacuum filled, raising the internal insulation strength. The all-new structural design and manufacturing process, together with the hermetically sealed corrugated-fin tank, give the product an attractive appearance.
- S11 35 kV performance and features: The core is made of high-quality cold-rolled grain-oriented silicon steel sheet, which effectively improves the flux density distribution inside the core, reducing noise and losses. The windings use high-strength enamelled wire (or paper-covered wire), wound in cylindrical (or disc) construction, with uniform ampere-turn distribution and a rational insulation structure, giving strong short-circuit withstand capability. The tank surface is phosphated and then coated with a three-proof finish (moisture-proof, mould-proof and salt-fog-proof), and the product is widely used in metallurgy, mining, petrochemicals and other harsh environments.
Drawings and parameters

Technical parameters
Model parameters (1 of 4)
| Capacity kVA | HV | HV tapping | LV | Vector group | No-load | Load | Short-circuit impedance % | No-load current % | Oil weight | Active part weight | Total weight | Overall dimensions (mm) L×W×H | Wheel centre distance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.10 | 0.63/0.60 | 4.0 | 1.5 | 95 | 150 | 370 | 1070×660×960 | 400×400 |
| 50 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.13 | 0.91/0.87 | 4.0 | 1.3 | 110 | 210 | 460 | 1130×700×1010 | 400×400 |
| 63 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.15 | 1.09/1.04 | 4.0 | 1.2 | 115 | 240 | 505 | 1150×710×1070 | 550×550 |
| 80 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.18 | 1.31/1.25 | 4.0 | 1.2 | 135 | 300 | 600 | 1190×720×1130 | 550×550 |
| 100 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.2 | 1.58/1.50 | 4.0 | 1.1 | 135 | 330 | 610 | 1210×800×1140 | 550×550 |
| 125 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.24 | 1.89/1.80 | 4.0 | 1.1 | 153 | 388 | 720 | 1320×820×1160 | 550×550 |
| 160 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.28 | 2.31/2.20 | 4.0 | 1 | 164 | 448 | 800 | 1350×835×1190 | 550×550 |
| 200 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.34 | 2.73/2.60 | 4.0 | 1 | 182 | 540 | 910 | 1360×845×1225 | 550×550 |
| 250 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.40 | 3.2/3.05 | 4.0 | 0.9 | 217 | 655 | 1090 | 1380×875×1275 | 660×660 |
| 315 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.48 | 3.83/3.65 | 4.0 | 0.9 | 300 | 810 | 1390 | 1430×880×1390 | 660×660 |
| 400 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.57 | 4.52/4.30 | 4.0 | 0.8 | 330 | 940 | 1610 | 1500×880×1430 | 660×660 |
| 500 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.68 | 5.41/5.15 | 4.0 | 0.8 | 390 | 1190 | 1970 | 1590×900×1530 | 660×660 |
| 630 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.81 | 6.20 | 4.5 | 0.6 | 420 | 1360 | 2210 | 1670×930×1550 | 660×660 |
| 800 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.98 | 7.50 | 4.5 | 0.6 | 600 | 1570 | 2750 | 1750×1030×1640 | 820×820 |
| 1000 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.15 | 10.3 | 4.5 | 0.6 | 671 | 1672 | 3200 | 1790×1100×1730 | 820×820 |
| 1250 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.36 | 12.8 | 4.5 | 0.5 | 757 | 1964 | 3710 | 1930×1210×1750 | 820×820 |
| 1600 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.64 | 14.5 | 4.5 | 0.5 | 859 | 2382 | 4370 | 2000×1230×1860 | 820×820 |
| 2000 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.94 | 18.3 | 4.5 | 0.4 | 1000 | 2795 | 5130 | 2050×1340×2080 | 820×820 |
| 2500 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 2.29 | 21.2 | 4.5 | 0.4 | 1200 | 3200 | 5850 | 2100×1390×2250 | 820×820 |
Model parameters (2 of 4)
| Capacity kVA | HV | HV tapping | LV | Vector group | No-load | Load | Short-circuit impedance % | No-load current % | Oil weight | Active part weight | Total weight | Overall dimensions (mm) L×W×H | Wheel centre distance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 200 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 0.38 | 2.90 | 4.0 | 1.0 | 280 | 605 | 1280 | 1700×980×1550 | 550×550 |
| 250 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 0.44 | 3.42 | 4.0 | 0.90 | 320 | 670 | 1330 | 1780×995×1590 | 550×550 |
| 315 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 0.53 | 4.10 | 4.0 | 0.90 | 435 | 845 | 1715 | 1935×1220×1725 | 660×660 |
| 400 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 0.64 | 4.95 | 4.0 | 0.80 | 480 | 1010 | 1980 | 2025×1350×1850 | 660×660 |
| 500 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 0.76 | 5.89 | 4.0 | 0.80 | 530 | 1300 | 2350 | 2080×1410×1920 | 660×660 |
| 630 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 0.96 | 7.26 | 4.5 | 0.60 | 715 | 1525 | 2950 | 2110×1460×1980 | 820×820 |
| 800 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 1.12 | 8.89 | 4.5 | 0.60 | 900 | 1595 | 3405 | 2470×1630×2270 | 820×820 |
| 1000 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 1.36 | 10.4 | 4.5 | 0.60 | 795 | 1730 | 3420 | 2560×1675×2540 | 820×820 |
| 1250 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 1.56 | 12.3 | 4.5 | 0.50 | 980 | 2650 | 4610 | 2605×1720×2770 | 820×820 |
| 1600 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 1.92 | 14.7 | 4.5 | 0.50 | 1210 | 3105 | 5350 | 2610×1850×2810 | 1070×1070 |
| 2000 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 2.27 | 18.6 | 5 | 0.40 | 1780 | 3520 | 6800 | 2780×2475×2815 | 1070×1070 |
| 2500 | 6 6.3 10 10.5 | ±4×2.5% | 0.4 | Yyn0 Dyn11 | 2.68 | 21.6 | 5 | 0.40 | 2050 | 3985 | 8040 | 2820×2425×2635 | 1070×1070 |
Model parameters (3 of 4)
| Capacity kVA | HV | HV tapping | LV | Vector group | No-load | Load | Short-circuit impedance % | No-load current % | Oil weight | Active part weight | Total weight | Overall dimensions (mm) L×W×H | Wheel centre distance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.16 | 1.20 | 6.5 | 1.3 | 330 | 300 | 860 | 1195×935×1825 | 660×660 |
| 100 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0..23 | 2.01 | 6.5 | 1.1 | 385 | 470 | 1130 | 1200×965×1935 | 660×660 |
| 125 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.27 | 2.37 | 6.5 | 1.1 | 465 | 550 | 1335 | 1235×940×1955 | 660×660 |
| 160 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.28 | 2.82 | 6.5 | 1.0 | 485 | 580 | 1475 | 1285×895×1960 | 660×660 |
| 200 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.34 | 3.32 | 6.5 | 1.0 | 595 | 680 | 1755 | 1310×1150×1985 | 660×660 |
| 250 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.40 | 3.95 | 6.5 | 0.95 | 650 | 860 | 2000 | 1450×1090×2010 | 660×660 |
| 315 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.48 | 4.75 | 6.5 | 0.95 | 765 | 980 | 2290 | 1630×1065×2110 | 820×820 |
| 400 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.58 | 5.74 | 6.5 | 0.85 | 885 | 1170 | 2725 | 1850×1155×2015 | 820×820 |
| 500 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.68 | 6.91 | 6.5 | 0.85 | 960 | 1340 | 3090 | 2045×1205×2415 | 820×820 |
| 630 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.83 | 7.86 | 6.5 | 0.65 | 895 | 1550 | 3810 | 2085×1240×2515 | 820×820 |
| 800 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.98 | 9.4 | 6.5 | 0.65 | 1030 | 1990 | 4510 | 2305×1615×2685 | 820×820 |
| 1000 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.15 | 11.5 | 6.5 | 0.65 | 1475 | 2415 | 5055 | 2545×1540×2590 | 820×820 |
| 1250 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.40 | 13.9 | 6.5 | 0.6 | 1485 | 2480 | 5290 | 2495×2010×2675 | 820×820 |
| 1600 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.69 | 16.6 | 6.5 | 0.6 | 1490 | 2600 | 5450 | 2680×2100×2970 | 820×820 |
| 2000 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.99 | 19.7 | 6.5 | 0.55 | 1495 | 3275 | 6380 | 2545×2650×2740 | 820×820 |
| 2500 | 35 38.5 | ±5 ±2×2.5% | 0.4 | Yyn0 Dyn11 | 2.36 | 23.2 | 6.5 | 0.55 | 1795 | 3575 | 7230 | 2570×2490×2875 | 1070×1070 |
Model parameters (4 of 4)
| Capacity kVA | HV | HV tapping | LV | Vector group | No-load | Load | Short-circuit impedance % | No-load current % | Oil weight | Active part weight | Total weight | Overall dimensions (mm) L×W×H | Wheel centre distance (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.08 | 0.63/0.60 | 4.0 | 1.61 | 95 | 150 | 280 | 810x650x820 | 400×400 |
| 50 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.1 | 0.91/0.87 | 4.0 | 1.4 | 110 | 210 | 390 | 820x680x840 | 400×400 |
| 63 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.11 | 1.09/1.04 | 4.0 | 1.33 | 115 | 240 | 440 | 850x700x860 | 550×550 |
| 80 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.13 | 1.31/1.25 | 4.0 | 1.33 | 135 | 300 | 495 | 900x730x930 | 550×550 |
| 100 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.15 | 1.58/1.50 | 4.0 | 1.26 | 135 | 330 | 600 | 910x750x990 | 550×550 |
| 125 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.17 | 1.89/1.80 | 4.0 | 1.19 | 153 | 388 | 690 | 1000x760x1060 | 550×550 |
| 160 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.20 | 2.31/2.20 | 4.0 | 1.12 | 164 | 448 | 780 | 1090x770x1135 | 550×550 |
| 200 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.24 | 2.73/2.60 | 4.0 | 1.05 | 182 | 540 | 910 | 1120x790x1165 | 550×550 |
| 250 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.29 | 3.2/3.05 | 4.0 | 0.98 | 217 | 655 | 1040 | 1140x810x1220 | 660×660 |
| 315 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.34 | 3.83/3.65 | 4.0 | 0.98 | 300 | 810 | 1190 | 1170x830x1240 | 660×660 |
| 400 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.41 | 4.52/4.30 | 4.0 | 0.91 | 330 | 940 | 1430 | 1220x1020x1270 | 660×660 |
| 500 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.48 | 5.41/5.15 | 4.0 | 0.84 | 390 | 1190 | 1650 | 1300x1180x1320 | 660×660 |
| 630 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.57 | 6.20 | 4.5 | 0.77 | 420 | 1360 | 2030 | 1500x1210x1480 | 660×660 |
| 800 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.70 | 7.50 | 4.5 | 0.70 | 600 | 1570 | 2320 | 1840x1250x1620 | 820×820 |
| 1000 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.83 | 10.3 | 4.5 | 0.70 | 671 | 1672 | 2600 | 1890x1400x1680 | 820×820 |
| 1250 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 0.97 | 12.0 | 4.5 | 0.63 | 757 | 1964 | 2890 | 2050x1460x1710 | 820×820 |
| 1600 | 6 6.3 10 10.5 11 | ±5% ±2×2.5% | 0.4 | Yyn0 Dyn11 | 1.17 | 14.5 | 4.5 | 0.56 | 859 | 2382 | 3380 | 2200x1520x1950 | 820×820 |
Tell us the rated voltage, capacity, fault level and installation country, and we will confirm the build sheet, drawing set and delivery schedule for this model. E-mail [email protected] or use the quote form on this page.
HANI is one of China’s leading professional industrial electrical automation manufacturers, providing complete drive and control solutions to customers worldwide. HANI focuses on designing and manufacturing integrated automation systems that meet the industry’s highest standards of precision, efficiency, and durability. Our engineering expertise lies in providing turnkey electrical automation projects to optimize the performance of modern industrial manufacturing plants.





